Send an Inquiry

How to Order Protection Relays: MOQ, Lead Time, Payment

We sell direct from the factory rather than through a marketplace, so buying is a short conversation with an engineer instead of a checkout page. This page explains what happens after you send an enquiry – what we need from you, what you get back, and the commercial terms that apply.

At a glance: minimum order 1 unit. Standard models ship in 7-15 working days. Every enquiry is answered within 12 hours, 09:00-17:00 (UTC+8), Monday to Sunday. Trade terms EXW, FOB, CIF or DDU. Payment by T/T, L/C, Western Union or PayPal. Every product carries a 12-month warranty.

Two situations cover most first enquiries: a single relay for a retrofit, and a project list that has to be quoted line by line. Both are handled the same way – send the application, get a model match and a quotation with the trade terms already stated.

1. Send your requirements

Tell us the application: rated voltage, CT/VT ratios if you have them, the protection functions you need (for example ANSI 87T, 87G, 87L, 51N, 21 or 32), the panel or switchgear it goes into, and any communication requirement (IEC 61850, Modbus or RS-485). If you only have a single-line diagram or a photo of the existing relay, that is enough to start.

2. Get a model match and a quotation

We reply with the model that fits the application, the datasheet and wiring drawing, and a quotation. If a smaller unit covers your scheme we will say so – the aim is a relay that is correct for the protection scheme, not the largest one in the range.

3. Sample or bulk order

MOQ starts at 1 unit for samples. Bulk orders typically ship in 7-15 working days depending on quantity and customization. Shipping terms: EXW, FOB, CIF or DDU. Payment by T/T, L/C, Western Union or PayPal.

4. Setting, testing and commissioning support

We provide free technical guidance, parameter setting and commissioning support, so the relay goes into service with the settings your scheme needs. All products carry a 12-month warranty against manufacturing defects.

Send a BOM or a multi-item project list

Project lists are quoted line by line. Send the BOM, the equipment schedule or the drawing package in any format: Excel, PDF or a photo of a printed list. Each line is matched to a model and the quotation carries your line number next to the matched model, so the panel builder or the EPC contractor can check it without cross-referencing part numbers. If two lines can be served by the same model, the quotation says so.

Mixed lists are normal. Relays, protection and control panels, communication units and auxiliary equipment can be quoted on one document under one set of trade terms. Give the required on-site date and it is checked against the production schedule before the quotation is issued.

What drives the price

Protection equipment is configured to the scheme, so the price follows the configuration rather than a fixed list price. The factors that move it most:

  • Protection functions required. A feeder relay with overcurrent and earth fault costs less than a multi-function unit carrying distance, differential and breaker failure functions.
  • Communication. IEC 61850, Modbus RTU or a protocol gateway changes the board set and therefore the configuration.
  • Form of supply. A relay alone, a relay mounted in a panel, or a complete protection and control panel with wiring and factory acceptance testing.
  • Voltage class, CT and VT ratios, and the number of bays or feeders on one scheme.
  • Quantity and delivery date. Standard production against an expedited slot.
  • Documentation and testing scope. Routine factory test report, or witnessed factory acceptance testing with client attendance.

If you are working to a budget, state the budget and the function set can be adjusted to fit, instead of quoting a scheme that cannot be approved.

What ships with an order

A relay is delivered with the operation manual, the wiring schematic, the parameter setting guide and the factory inspection report – the four documents a commissioning engineer needs on site.

A protection and control panel is delivered with the general arrangement drawing, the schematic and terminal connection diagrams, the bill of materials, the relay setting schedule, the factory acceptance test report, the operation and maintenance manual, the communication protocol mapping and the certificate of conformance. As-built drawings are added where the project specification requires them.

Questions buyers ask before ordering

Do you supply direct, or do I have to go through a distributor?

We supply direct from our own plant, so you deal with the manufacturer rather than a distributor, reseller or marketplace seller. That matters for three reasons. First, the quotation comes from the engineering team that configures the relay, so a non-standard rating, a protocol or a panel arrangement is confirmed instead of promised. Second, there is no distributor margin between the enquiry and the price, and no third party relaying technical questions. Third, technical support and commissioning assistance stay with the same team after delivery. We quote to EPC contractors, panel builders and system integrators, and we support the specification through to commissioning. ISO 9001:2015 certification (certificate 41925Q10467-06R0S) covers the manufacturing process, and relays built here are in service in 43 countries. If you are benchmarking an authorized supplier, ask for the datasheet, the wiring drawing and the delivery date in writing.

Can you quote from a BOM or a multi-item list?

Yes. Send the bill of materials, the equipment schedule or the drawing package in any format you have: Excel, PDF, or a photo of a printed list. Every line is matched to a model, and the quotation returns your own line numbers beside the matched model, the unit price and the trade term, so a panel builder or an EPC contractor can check it without cross-referencing part numbers. Where two lines can be served by the same relay, the quotation says so. Mixed lists are normal: relays, protection and control panels, communication units and auxiliary equipment can be quoted on one document under one set of trade terms. Give the required on-site date and it is checked against the production schedule before the quotation is issued. Enquiries are answered within 12 hours, 09:00 to 17:00 UTC+8, Monday to Sunday, and a fast quote on a long list is normal.

What is the minimum order quantity?

One unit. A single set can be ordered for evaluation, for a pilot installation or to replace one failed relay in an existing panel; there is no minimum carton, no minimum value and no distributor pack size to fill. Project quantities are quoted separately, and the unit price on a project follows the configuration and the quantity rather than a list price. A single sample ships on the same 7 to 15 working day lead time as a bulk order, so an engineering team can test one relay before the specification is frozen. If the single unit is a replacement, a photo of the existing nameplate and the ratings is usually enough to identify the model. Documents that ship with it include the operation manual, the wiring schematic, the parameter setting guide and the factory inspection report.

What is the lead time?

Standard models ship in 7 to 15 working days after the order is confirmed, and that window covers most of the catalogue: feeder and transformer relays, generator protection, motor protection and distribution automation units. Custom ratings, special protocols such as IEC 61850 variants, or a panel built to a project specification are confirmed in writing before the order is placed, so the delivery date is fixed in advance rather than estimated afterwards. Where the required on-site date is tight, state it with the enquiry: the date is checked against the production schedule before the quotation is issued, and where the schedule cannot meet it you are told before you commit. Shipping terms are EXW, FOB, CIF or DDU, so transport time from the plant to your site is quoted alongside the production time. Air freight is used for urgent single units.

Which payment methods and trade terms do you accept?

Payment by T/T, L/C, Western Union or PayPal. Trade terms are EXW, FOB, CIF or DDU, chosen to match how the consignment is collected and how the project is financed. For a first order, T/T against a proforma invoice is the common route; for project quantities an L/C at sight is normal; Western Union and PayPal are used for samples and small spare-parts orders where a bank transfer costs more than the goods. CIF and DDU are quoted with the freight element shown separately, so the landed cost can be compared between suppliers instead of guessed. The trade term is written on the quotation itself, together with the currency and the validity, so there is no ambiguity later about who pays freight, insurance or import duty. Warranty is 12 months against manufacturing defects, and the terms do not change with the payment method chosen.

What documents are supplied with a relay or a panel?

A relay ships with four documents: the operation manual, the wiring schematic, the parameter setting guide and the factory inspection report. Those are the four a commissioning engineer needs on site, and they are supplied printed and as files. A protection and control panel adds the general arrangement drawing, the schematic and terminal connection diagrams, the bill of materials, the relay setting schedule, the factory acceptance test report, the operation and maintenance manual, the communication protocol mapping and the certificate of conformance. As-built drawings are added where the project specification requires them. If IEC 61850 is used, the CID or SCD files and the point mapping are included so the substation integrator can import the device without rebuilding the model. If your document list follows a client standard, send it with the enquiry and the quotation states which items are covered.

Is commissioning support included, and who does the setting?

Technical guidance, parameter setting and commissioning support are included, so the relay goes into service with settings that match the scheme rather than factory defaults. Three routes are used. For a single relay, the setting schedule is agreed by email: you send the CT and VT ratios, the protection functions and the grading data, and the settings come back ready to load. For a panel, the relay setting schedule is issued with the factory acceptance test report, and the settings are loaded and tested before shipment. Where the site team needs help at energisation, remote assistance over a call is provided, and the support continues through the service life of the equipment rather than ending at delivery. Commissioning assistance is quoted as part of the project where attendance on site is required. State the scheme and the standard you work to, and the support is matched to it.

What if I only have a single-line diagram or a photo of the existing relay?

That is enough to start. A single-line diagram, a photo of the nameplate and the marked ratings usually identify the model, the protection functions and the CT and VT arrangement, which is all that is needed for a first reply. A full specification is not required before the first quotation: it can be built up with the engineering team, question by question. Photographs of the existing relay, of the terminal block and of the panel door are often more useful than a datasheet, because they show the mounting, the wiring and the space available for a replacement. Where a like-for-like replacement is no longer made, the closest current model is proposed with the differences listed, so the scheme is checked before the order. Send the diagram or photo through the form or WhatsApp and you get the model match and the quotation.

Can you supply relays that communicate over IEC 61850, Modbus or RS-485?

Yes, on the models where it is specified. Communication is chosen with the scheme rather than added afterwards, so state the requirement with the enquiry: IEC 61850 with GOOSE messaging for substation automation, Modbus RTU over RS-485 for a plant network, or a protocol gateway where the upstream system expects something else. The protocol changes the board set and therefore the configuration and the price, which is why it is asked for in the first reply. When IEC 61850 is used, the CID or SCD files and the point mapping are supplied with the device so a substation integrator can import it without rebuilding the model, and the factory acceptance test report records the points that were tested. Communication units, RTUs and gateways sit in the same catalogue, so a panel that has to speak to a SCADA system can be quoted as one package with the relays.

What does a protection relay project cost, and how should a budget be planned?

We do not publish a list price, because a protection relay is configured to the scheme and the price follows the configuration. Four factors move it most: the protection functions required, since a feeder relay with overcurrent and earth fault costs less than a multi-function unit carrying distance, differential and breaker failure; the communication requirement, since IEC 61850, Modbus RTU or a gateway changes the board set; the form of supply, whether a relay alone, a relay mounted in a panel, or a complete protection and control panel with wiring and factory acceptance testing; and the quantity together with the required delivery date. CT and VT ratios, voltage class and the number of bays on one scheme also enter the quotation. Send the drawings or the BOM and the quotation is issued line by line, so a project budget is built from real unit prices rather than a guess.

Start a quote request

Use the form on our contact page or email us directly – include the model or the application and we will come back with a quotation. Browsing first? The main groups are substation protection relays, generator protection, motor protection, renewable energy protection, distribution automation, auxiliary equipment and protection and control panels.

Buying from outside the United States?

Orders shipped outside the US usually need a different document set and a faster channel than email. The international project page lists the six items that make a specification-matched quotation possible, and the WhatsApp number that reaches a sales engineer directly.

Models most often quoted on this page’s terms: the 87T transformer differential relay, the ASL-441H feeder protection relay and the ANSI 11 generator protection panel. Each is quoted with model mapping, lead time and EXW / FOB / CIF / DDU terms in the same reply.

High Quality

Stable performance, reliable design, ensuring safe operation for power system protection and grid stability.

Fast Delivery

Timely delivery to support your urgent orders and project schedules efficiently and professionally at any time.

Best Warranty

Professional Warranty: Reliable after-sales support for stable relay protection and long-term customer satisfaction.