-
Leon Zhang Sales Manager
-
Email: sale@relayprotect.com
-
Phone/WhatsApp: +86 13655813266
87 Differential Setting Worksheet
This worksheet works out the bias characteristic of a two winding transformer differential. You enter the transformer, the CTs and the fault levels, and it tells you whether the relay will see a fault inside the zone and stay stable on a fault outside it.
What the sheet works out
- Current at rated load on both sides, in per unit of the relay
- Ratio mismatch between the two CT sets
- Is1 minimum operate level in secondary amps
- Sensitivity against the minimum internal fault
- Operate threshold at the maximum through fault, with both slopes applied
- Spurious differential current that CT error produces at that through fault
- Stability margin between the two
What is inside the workbook
- Input – five sections, yellow cells only
- Results – the bias characteristic point by point
- Checklist – ten checks before the setting is issued
- Notes – the assumptions and what the sheet does not cover
What it does not replace
It is a calculation aid. CT errors are lumped into one allowance, the stability margin is a working rule rather than a standard requirement, and vector group compensation, CT saturation and the relay algorithm all change the real numbers. It does not replace a protection coordination study or the relay manual.
Get the worksheet
Send the form below and the download link appears on the next page. The email and the message box are the only required fields.
If the differential has to be right first time, send the single line diagram, the CT ratios and classes, the transformer vector group, the relay model and the fault levels. We work the sheet through and send it back, normally within 12 hours.
